|
REFRACTORY MATERIALS
110-J Fiber Paper
Isofrax Fiber Paper
1/8" Fiberfrax Paper (550)
1/32" Fiberfrax
Paper (970) Thinfire
fiber paper
Ceramaguard
Rope
Important Note About Shipping Costs:
The price for heavy or large sized refractory items includes an
additional charge to offset the higher costs of shipping these items. In
most cases we ship either via USPS Priority or UPS Ground (whichever is
best). Please select Priority Mail shipping during the check out
process, and we will ship using the most favorable carrier. |
|
110-J Fiber
Paper A rigid paper
that can be used as a separator on kiln shelves. Longer lasting
than ordinary soft fiber paper. 1/8 inch (3.24mm) thick. Before
using, pre-fire to 1350 to 1450 F (around 750 C).
|
Description |
Price |
Add to Cart |
| Eight small squares, each approximately 6
inches (14cm) square |
$9.95 |
 |
| Four medium squares, each approx, 12 inches
(30.5) cm square |
$18.95 |
|
| Three large rectangles, each 18 inches by
16 inches (45.7 by 40.6 cm ) |
$35.95 |
|
| Four 21" (53.3 cm) squares, two 6" by 21"
rectangles |
$83.95 |
|
|
One full sheet, cut to order. Sheet is 42"
by 48".
Note that
pieces larger than 42" by 24" cannot be shipped. |
$94.95 |
|
|
|
Isofrax
fiber paper A
3mm thickness
(about 1/8") .fiber paper. Unlike most fiber papers,
Isofrax meets European
regulatory requirements and is not carcinogenic. Before
using, pre-fire to 1350 to 1450 F (around 750 C).
|
Description |
Price |
Add to Cart |
| Four 12" (20.5cm) squares (total of 4
square feet) |
$15.95 |
|
| One large rectangle -- 24" by 5 feet (total of
10 square feet) |
$34.95 |
|
|
|
Fiberfrax
fiber paper
(550) 1/8"
thick fiber paper. 550 paper is a standard grade fiber
paper made by Unifrax. Suitable for kiln shelf or for applications where
flexibility is desired. Pre-fire to 1350 to 1450 F (around 750 C).
|
Description |
Price |
Add to Cart |
| Four 12" (20.5cm) squares (total of 4
square feet) |
$12.95 |
|
| One large rectangle -- 24" by 5 feet (total of
10 square feet) |
$29.95 |
|
|
|
Fiberfrax
fiber paper
(970) 1/32"
thick fiber paper. 970A paper is high-purity Fiberfrax
washed fiber. It is thin enough to punch with craft punches for
kiln-carving or related applications. Pre-fire to 1350 to 1450 F (around 750 C).
|
Description |
Price |
Add to Cart |
| One large rectangle -- 24" by 5 feet (total of
10 square feet) |
$14.95 |
|
|
|
Thinfire shelf paper The
thickness of a sheet of paper, Thinfire paper is much easier to use than
kiln wash and leaves a smooth finish on the backside of the glass. (Single use only, do not prefire.)
Please inquire if you are interested in larger
quantities of Thinfire paper.
|
Description |
Price |
Add to Cart |
| Six sheets of thinfire, each 20 1/2" by 20 1/2"
(16% discount) |
$19.95 |
|
| Twenty sheets of thinfire, each 20 1/2" by 20
1/2" (24% discount) |
$59.95 |
|
| If you wish to order 100 sheets of thinfire,
please contact us. $2.13 per sheet. We also have full
rolls of thinfire (41" by 250 feet) at a significant discount.
Please contact us for details. |
|
|
Ceramaguard
Ceiling Tile A soft board that can be easily cut to make drop rings
and molds. Fragile, but will last a very long time if you are
careful. Perforated. Before using, pre-fire to 1350 to 1450 F (around 750
C).
|
Description |
Price |
Add to Cart |
| Three medium squares, each 12 inches (30.5 cm),
5/8 inch thick |
$17.95 |
|
Please note that due to the nature of the product
the edges and the top surface of the Ceramaguard may be slightly ragged.
|
|
Fiberfrax Rope One
half inch diameter fiber rope. Use to add texture to fused and
slumped items. Like most refractory products, best if pre-fired to
remove binder.
|
Description |
Price |
Add to Cart |
| One linear foot, 1/2" diameter fiber rope |
$2.95 |
|
| Ten linear feet, 1/2" diameter fiber rope |
$24.95 |
|
|
